Z61Y Forged Steel Welding Gate Valve
ukuran:DN10-DN100
Tekanan:1.6MPA-32MPA
Tipe sambungan:Las
Tipe Sealing:Sealing hard
Tujuan:Blok
Cara nyopir:Manual
Arah aliran:loro-lorone
Kisaran suhu:-29 ℃ -425 ℃
Bahan awak:Baja karbon
Range medium:Banyu, pelarut, gas alam, oksigen, hidrogen peroksida, metana, etilena, lsp
Aplikasi:Industri pertambangan, industri minyak bumi, pipa jarak jauh, industri kimia, pembuatan kertas, farmasi, konservasi banyu, tenaga listrik, administrasi kotamadya, wesi lan baja
| Spesifikasi | L | W | G (Mbukak) | Bobot≈ | |||||
| sistem Inggris | Sistem metrik | CL150 | CL300 | CL600 | CL150 | CL300 | CL600 | ||
| 3/8 | 10 | 102 | - | - | 2.8 | 151 | 2.8 | - | - |
| 1/2 | 15 | 108 | 140 | 165 | 2.8 | 151 | 2.8 | 3.5 | 4.5 |
| 3/4 | 20 | 117 | 152 | 191 | 3.3 | 158 | 3.3 | 4.4 | 5.1 |
| 1 | 25 | 127 | 165 | 216 | 5.4 | 190 | 5.4 | 6.8 | 8.2 |
| 1 1/4 | 32 | 138 | 178 | 229 | 7.1 | 219 | 7.1 | 8.1 | 10.5 |
| 1 1/2 | 40 | 165 | 191 | 241 | 8.2 | 246 | 8.2 | 9.2 | 12.4 |
| 2 | 50 | 178 | 216 | 292 | 12.5 | 283 | 12.5 | 15.4 | 20 |
| Ora. | Jeneng bagean | CS kanggo ASTM jinis A105N | CS kanggo ASTM jinis F22 | SS kanggo ASTM | |
| Tipe F304(L) | Tipe F316(L) | ||||
| 1 | awak | A105N | A182 F22 | A182 F304(L) | A182 F316(L) |
| 2 | Kursi | A276 420 | A276 304 | A276 304(L) | A276 316(L) |
| 3 | Disk | A182 F430 | A182 F304 | A182 F304(L) | A182 F316(L) |
| 4 | Batang | A182 F6a | A182 F22 | A182 F304(L) | A182 F316(L) |
| 5 | Gasket | 304 Grafit fleksibel | 316+PTFE | ||
| 6 | Bonnet | A105N | A182 F22 | A182 F304(L) | A182 F316(L) |
| 7 | Bonet / bolt | A193 B7 | A193 B16 | A193 B8 | A193 B8M |
| 8 | Pin silinder | A276 420 | A182 F304 | ||
| 9 | Packing kelenjar | A276 410 | A182 F304(L) | A182 F316(L) | |
| 10 | Kelenjar mripat | A193 B7 | A193 B16 | A193B8 | A193B8M |
| 11 | Gland flange | WCB | A182 F11 | A182 F304(L) | A182 F316(L) |
| 12 | Nut | A194 2H | A1944 | A194 8 | A194 8M |
| 13 | Nut batang | A276 420 | |||
| 14 | Kacang kunci HW | A194 2H | A1944 | A194 8 | A194 8M |
| 15 | menehi tandha | SS | |||
| 16 | Roda tangan | HT200 | |||
| 17 | Gasket pelumas | A473 431 | |||
| 18 | Packing | Grafit fleksibel + serat karbon | PTFE | ||
| Media sing ditrapake | Banyu, uap, lenga, lsp. | Banyu, uap, lenga, lsp. | Asam nitrat, asam asetat, lsp | ||
| Suhu sing ditrapake | -29 ℃ -425 ℃ | -29 ℃ -550 ℃ | -29 ℃ -200 ℃ | ||
